Nickel Alloy Plate
Alloy C276 Nickel Alloy Plate: Air Pollution Control
Flue gas desulfurization (FGD) uses technologies to remove sulfur dioxide from exhaust gases in coal-fired power plants. Air pollution control in power generation and industrial environments is crucial due to strict air quality control laws and regulations. High concentrates of chlorides are found in the gases that are emitted from these plants. Other grades of alloys cannot withstand these higher chloride levels. Moreover, other conditions found in FGD systems, such as high temperatures, acidity, halides other than chlorides, wet and dry conditions, mineral deposits, and dew points, contribute to corrosion of FGD materials. Nickel alloy C276 (c-276) plate and sheet materials are ideal choices for air pollution control components found in flue gas desulfurization systems such as stack liners, absorbers, ducts, dampers, and stack gas reheaters and fans. Considered the "workhorse" alloy of the FGD industry, Nickel alloy C276 (c-276) offers reliable and low-maintenance services for corrosive-resistant air pollution control components.
C276 Nickel Alloy Properties
Nickel alloy C276 (c-276) plate, pipe and sheet material has been shown to withstand higher chloride content than other alloys. C276 (c-276) nickel alloy keeps its structural integrity through the harsh and challenging operating conditions of flue gas desulfurization systems. C276 (c-276) nickel alloy's addition of tungsten makes this material especially resistant to pitting and crevice corrosion. High molybdenum and chromium content also help nickel alloy C276 (c-276) stay resistant to chloride stress corrosion cracking. It is one of the few materials that can withstand the corrosive effects of chlorine dioxide. This alloy exhibits good high-temperature strength and good oxidation resistance; it can operate in oxidizing atmospheres up to 1900¡ãF. C276 (c-276) can be easily welded and processed utilizing standard shop fabrication processes. Additionally, C276 (c-276) plate can be hot and cold formed. It is also readily weldable by most standard processes and a post-weld heat treatment is not necessary. Alloy C276 (c-276) is machinable in the annealed condition. Click here for additional information on C276 (c-276) nickel alloy properties.
Sandmeyer Steel: The c276 Nickel Alloy Provider
Sandmeyer Steel Company, home to North America's largest single-site inventory of C276 (c276) plate and sheet material, is a lead supplier of C276 (c-276) nickel alloy for air pollution control. The company stocks C276 nickel alloy plate in thicknesses from 3/16" (4.8mm) to 2 1/2" (63.5mm). Sandmeyer offers comprehensive in-house plate processing capabilities while using an in-house quality control system to deliver the best products possible. If you are in need of materials for air pollution control system components, call (1-800-523-3663) or email a sales representative to obtain information on pricing and shipping.
NOTE: The information and data in this product data sheet are accurate to the best of our knowledge and belief, but are intended for informational purposes only, and may be revised at any time without notice. Applications suggested for the materials are described only to help readers make their own evaluations and decisions, and are neither guarantees nor to be construed as express or implied warranties of suitability for these or other applications.
